--an alternative choice for Bosch PAD and 392 024 058 pumps
TOPSFLO has made the following improvements for the TA60 electric car water pump product performance improvement:
1, High efficiency ECM brushless DC motor; Durable permanent magnetic rotor & high density ceramic shaft
3, Replacing position sensor by micro processor position calculation, motor coreless control with much more intelligence and convenience(PWM speed control funciton available)
4, -40~135°C wide operating temperature is realized, suitable for extreme outdoor environment
5, Optimized 3 phase motor high efficiency design, combined with low-resistance copper wire, achieving large flow and low temperature rise.
6, Anti-vibration pump rubber bracket designed for automotive vibration working condition
7, Highly adaptable circuit designed specially for unstable automotive voltage and peak voltage
8, More protection functions
Protection functions |
Specific work description |
|
√ |
Over-voltage protection |
24V products: when power supply voltage exceeds 28.5V, the over-voltage protection is started and voltage is retested after 5 seconds, if the voltage is < 28V, the pump will be back to work. |
√ |
Over-Current Protection |
When the pump operating current is > (7A for 12V products; 5A for 24V products), it's necessary to restart pump after power failure & troubleshooting, water pump will be back to normal. |
√ |
Blocked-Protection |
After pump rotor is stuck for 1 second, the pump will shut down, restart after 5 seconds, repeat the test until the pump returns to normal operation. |
√ |
Polarity Protection |
Within DC 30V, if the power polarity is connected reversely, the pump will not work and unrecoverable failure will not be produced. |
√ |
constant power output |
12V products: When the voltage is > 13V, pump will be with constant power output. When the voltage increases, the product flow remains unchanged; |
√ |
Dry-running Protection |
When pump runs at low speed without water, the pump will reduce the working speed.If no water is detected again,cycle running protection will be continued, and pump will be back to normal once with water. |
At present, more and more OEM customers look for TOPSFLO TA50 & TA60 to replace Bosch DC micro car circulation pump, not only because of its competitive prices, but also for its excellent performance and suitability. Specific parameters can be compared as follows:
Comparison sheet |
||
Specification |
Bosch PAD 12V circulation pump |
TOPSFLO TA50-R12-2302 |
Rated Voltage |
12V |
12V |
Operating range |
12-14V |
6-18V |
Max flow rate |
23L/min |
23 L/min |
Max head pressure |
2M |
2.5M |
Power supply way |
Battery & swiching power supply |
Battery & swiching power supply/meet car power supplying way which occur high peak voltage or unstable voltage |
Environment temperature durability |
range -40-120℃ |
wider range -40-135℃ / suitable for extreme outdoor environment |
Comparison sheet |
||
Specification |
Bosch 0 392 024 058 |
TOPSFLO TA60-R12-3409 |
Rated Voltage |
12V |
12V |
Operating range |
12-14V |
6-18V |
Max flow rate |
38L/min |
12V 34 L/min; 24V 37L/min |
Max head pressure |
6M |
9M |
Power supply way |
Battery & swiching power supply |
Battery & swiching power supply/meet car power supplying way which occur high peak voltage or unstable voltage |
Environment temperature durability |
range -40-120℃ |
wider range -40-125℃ / suitable for extreme outdoor environment |
TOPSFLO looks forward to establish cooperation with more clients. We have a strong R & D team which can achieve customized products, not only with experience and efficiency, but also giving you good satisfaction from aspects to bring a long term reliable cooperation.